Frame Saws and other Hand Saws

E.C.E. Frame Saws designed to your highest expectations:

  • Elegant bridge support of hornbeam for stability
  • Support bar made from light lime-tree
  • Blade sharpened and set ready for use
  • Tension element is a heavy steel rod with wing nut for tensioning
  • Saw blade grommet and pin stabilizes saw blade
  • Arms and handles ergonomically shaped
     


Art-No. 253

Tension Saw
Saw blade with coarse teeth. Tooth breast is about 90° to the longitudinal axis of the saw blade for push cut.

Use to cut squared lumber, cut across the grain

Art.-No.

Length of saw 
blade inches

 Teeth per inch

Type
253.60
253.61 		24
24

5 
 

Complete
Saw blade

253.70
253.71

28
28

 5
 

Complete
Saw blade


Art-No. 2503

Fast Cutting Frame Saw (Japanese teeth design)
 A saw with the extraordinary qualities. 

Straight and accurate cuts are achieved with little exertion - in soft and hard woods, with or cross grain - cuts on pull stroke.

Uses are universal.

Teeth: Precision sharpened, Hardness 70 HRc!

Art.-No.

Length of saw blade inches

 Teeth per inch

Type
2503.60 24 12 Complete

2503.61

24

 12

Saw blade


Art-No. 250

Set-off saw
Saw blade with a small space from tooth to tooth - 1/8 inch. The tooth breast has a slight negative cutting angle, cuts on push stroke.

Use for accurate, fine cuts, for example tenons and dovetails.

Art.-No.

 Length of saw blade inches

Teeth per inch

Type
250.60
250.61

24
24

 9
 		 Complete 
Saw blade

250.70
250.71

 28
28		 9
 

Complete
Saw blade


Art-No. 252

Curve Saw
Narrow saw blade with fine teeth. Blade cuts curves. The tooth breast has a slight negative cutting angle, cuts on push stroke.
 

Art.-No.

 Length of saw blade inches

Teeth per inch

Type

252.60
252.61

 24
24

9

Complete
Saw blade


Art-No. 251

Two-Way Saw
Saw blade has considerable distance between teeth. The tooth design is similar to an isosceles triangle. The cutting angle is equal on both sides, so it may be used for pushing and pulling. The teeth are set coarsely.

Use for ripping timbers and boards.

Art.-No. Length of saw blade inches Teeth per inch Type

251.60
251.61

 24
24

4 

Complete
Saw blade
251.70
 251.71 		 28
28		 4

Complete
Saw blade

251.80
251.81

 31 3/4
31 3/4		 4  Complete
Saw blade



Art-No. 202

 

 

 

 

  


Art-No. 202.26 R


Art-No. 202.26 RJ

Maximum Power Hand Saw (Japanese Teeth design)
Extraordinary cutting performance requiring low energy.
  • High precision sharpening
  • Teeth hardened to 70 HRC
  • Very thin blade has fine set
  • Good chip ejection

Replacement blades are recommended in lieu of sharpening because of the extraordinary hard steel.

Art.-No.

Length of saw blade inches

Type

202.26

10 1/2

with pistol handle
202.27
 		 10 1/2
 		 Replacement blade,
fits No. 202.26/R/RJ
202.28
 

9
 

Replacement blade finer teeth,
fits No. 202.26/R/RJ

 

202.26 R 10 1/2 Straight rubber handle

 

202.26 RJ 10 1/2 Straight handle wrapped with Rattan

Art-No. 210.24

Dozuki Universal

Art-No.

Length of saw blade inches

 Teeth per inch

Type
210.24 9 1/2 17 Japanese Teeth design with back, blade thickness 0,3 mm

Art-No. 209.24

 

Dozuki Mini

Art-No.

Length of saw blade inches

 Teeth per inch

Type
209.24 5 7/8 18 Japanese Teeth design with back, blade thickness 0,3 mm

Art-No. 211.24

 

Ryoba Komane

Art-No.

Length of saw blade inches

 Teeth per inch

Type
211.24 9 1/2 21 / 8 Japanese Teeth design with different teeth on both sides, without back, blade thicknes 0,4 mm


Art-No. 205/204/203

 Fine Cutting Back Saw, sharpened (3 Types)
 

Art.-No.

Length of saw blade inches

Teeth per inch

Type
205.25 9 7/8 11 Straight
204.25 9 7/8 11 Offset handle

203.25

 9 7/8 11

Offset handle, reversible


Art-No. 206

Back Saw
 

Art.-No.

Length of saw blade inches

 Teeth per inch

Type
206.30 12 11 Blade from electric furnace steel. Handle varnished

206.35

14

 11


Art-No. 208

 Panel Saw
 
Art.-No. Length of saw blade inches Teeth per inch Type
208.35 14 9 Blade from electric furnace steel. Handle varnished


Art-No. 254

 Compass or Keyhole Saw
 
Art.-No. Length of saw blade inches Teeth per inch Type
254.30 12 6 Blade from electric furnace steel. Handle varnished


Art-No. 258

Veneer Saw

Art.-No.

Length of saw blade inches

 Teeth per inch

Type

258.00

3

 18

Classic two-side curved edge veneer saw


Art-No. 255

Trenching Saw

Art.-No.

Length of saw blade inches

 Teeth per inch

Type

255.00

6

 6

Blade with adjustable depth from 0 to 9/16" deep


Art-No. 256

 Hack Saw
 

Art.-No.

 Length of saw blade inches

Teeth per inch

Type

256.01

 6 25

Adjustable handle


Art-No. 389

 Pincer for setting saw teeth
 

Art.-No.

Type

389.18

for hand saws with a thickness of blade to 1,5 mm (almost 1/16 inch)


Art-No. 263/264

 Three corner file for sharpening saw blades
 

Art.-No.

 Measures

Type
263.10 100 x 6,3 mm Triangle, Cut 2

264.10

 100 x 10 mm

Triangle, Cut 2

Top of Sheet | Previous Page

Home  | Products Manufactured | History of our Company | Contact us | Impressum

E.C. Emmerich Werkzeugfabrik GmbH + Co. KG
Herderstr. 7 - D-42853 Remscheid - Germany
Phone: +49 2191 80790 - Fax: +49 2191 81917 - E-Mail: planemandw@sbcglobal.net

© E.C. Emmerich Werkzeugfabrik GmbH + Co. KG, latest update: 23. April 2004